PG 110 Series
Pressure Gauges with chemical seal unit & threaded process connection

Diaphragm seals are provided to isolate the sensing element of pressure gauge from process fluids which are corrosive, viscous, sedimentous or high temperature fluids.

The diaphragm is welded to the top chamber & leak proof tested to ensure separation of filling fluid from process fluid. A flushing hole can also be provided for cleaning or purging the seal without its removal from the process.

Wetted part materials can be selected to suit practically all applications.

  • All stainless steel construction as an option
  • Weather-proof casing to IP:65, IS:2147
  • ±1% Accuracy along measuring range.
  • Direct & remote mounting designs.
Gauge Type
Sensing Element
Socket Entry
Mounting
Dial Size (mm)
Case Material
Sensing Element Mat'l
Socket Material
Movement Material
Capillary Length

Define eg 2000mm
Range

Select from Table A eg 0 to 25 kg/sqcm

Diaphragm seal unit
Diaphragm Material
Top chamber Material
Bottom chamber

 
Process Connection

Select other & enter any other Process Connection
Option Select from table B

Please fill the * blocks.    
Your Name : *
Company/Organisation Name (if any) :
Company/Residence Address for Correspondence :
Phone Number : *
Fax No. :
Website :
E-Mail : *

Do you need any specific or additional information about our Products from us ?

Do you feel we should add any other products to our portfolio?

Suggestions about the site: