440 Series

Thermocouple and Resistance Thermometer assemblies with

  • Solid Sintered Tungsten carbide Thermowell for mill classifier outlet.
  • Recrystallized Silicon carbide for use on high temperature and abrasive services.
  • Weather proof execution in 316SS or Aluminium
  • Available with "in head" 2-wire Temperature Transmitter.

Ms Mi Thermocouple or Resistance Thermometer sensor fitted into a terminal head, and provided with head extension and solid sintered Tungsten carbide thermowell would form typically, a complete assembly for use in Power Plants for highly abrasive services such as mill classifier outlet for temperature measurement of Coal + Air Mixture.

For use at relatively high temperatures we recommend re-crystallized Silicon carbide, which also has a very high abrasion resistance characteristics. These are recommended for use in Flue gas application in power plants or for use on incinerators employed in mordern day waste management systems of process plants. Standard well is available in diameter of 20mm; and is cemented into stainless steel bushing.

The standard execution as shown in this leaflet is with plated CS extension and Aluminum head with conduit entry of 1/2" NPT(M) and well entry of M20x1.5, and an ungrounded Thermocouple.

No of elements
Elements
Sheath Diameter
Sheath Material
Head Type
No of entries
Well Material
Flange Material
Well Insertion U mm/inches Define eg. 200mm
Well Extension T mm/inches Define eg. 50mm
Head Extension N mm/inches Define eg N=150
Flange P   

Options

Select and enter the options required
Please fill the * blocks.    
Your Name : *
Company/Organisation Name (if any) :
Company/Residence Address for Correspondence :
Phone Number : *
Fax No. :
Website :
E-Mail : *

Do you need any specific or additional information about our Products from us ?

Do you feel we should add any other products to our portfolio?

Suggestions about the site: