TG 460 Series

Thermometer Assemblies with

  • A Van Stone Thermowell with or without weld joints.
  • Safe Design as per ASME PTC 19.3
  • Weather-proof casing to IP:65,IS:2147
  • All stainless steel construction as an option
  • ± 1% FSD accuracy along measuring range.
  • Raised face or RTJ facing
  • 100% Radiography for weld joints
  • PWHT
  • Hardness to NACE MR-0175
  • Ferrite Number between 3 and 10

For highly corrosive services,Thermowells without a weld joint are recommended. If weld joint cannot be avoided, full penetration weld is carried out and checked by 100% radiography test.

The design shown in this leaflet fulfills this criteria. Thermowells can also be offered with PWHT of weld joint, hardness check as per NACE MR-0175, DP test, hydro test and ferrite number test.

Gauge Type
Stem Type
Stem Location
Mounting
Dial Size (mm)
Case Material
Stem Material
Stem/Bulb Diameter
Capillary
Capillary Length
Range

Select from Table A eg 0 to 100 degree C required

Well Material
Flange Material
Well Insertion U mm/inches

Define eg 200mm
Well Extension T mm/inches

Define eg 50mm
Flange

Select other and define Flange size, rating and facing. Please also define the values of ØR & ØK
Option Select from table B

Please fill the * blocks.    
Your Name : *
Company/Organisation Name (if any) :
Company/Residence Address for Correspondence :
Phone Number : *
Fax No. :
Website :
E-Mail : *

Do you need any specific or additional information about our Products from us ?

Do you feel we should add any other products to our portfolio?

Suggestions about the site: